中文版 English  

 

Water Cooling

  Capability

  Radiator

  Pump

  Water exchanger

  Liquid block

  Water cooling system

 

Machining

 

Stamping

 

Brazing

 

Solar PV

 
 

Latest Product

 




 
 

        The Canadian COOLIT Sys. Company is special in designing and producing the water cool system. They have produced many water cooling products used for CPU and VGA cooling in the computer. This system can also be used in the server. For TEC technology is adopted, the heat dispersedness capacity can be  0.11/W. This water cooling system also can be used for transducer, high-power electronic device, medical instrument or the controller with high working environmental temperature. 

        Before filling the coolant, all the units are tested if it is leak. We use the HELIUM to check the leakage, the system leakage rate should be less than 5X10-6mbar.l/s. In order to keep less air bubble in the system, we use the vacuum machine to fill the coolant. The coolant is factory filled and sealed. Because we use the anti-penetrated rubber tube, the cooling system is maintenance free. The pump is the heart of the cooling unit. The noise is lower than 25dB and the MTBF is 50000 hours for the ceramic bearing and shaft are used. The customer can install the monitor software and use the USB module to adjust the fan’s speed, which can get the best cooling and lowest noise.

         The traditional water cooling unit has a lot of individual components which need the customer to setup the system by themselves. Now our product has integrated all the components. The coolant is pre-filled and the thermal compound has been covered. It is so easy for the amateur use it. All the installation only need two steps:   First install the water cooling head on the CPU; Second install the unit on the computer rear case.   

                                                 

 

Wuxi Formen Technical Co., Ltd    All Rights Reserved

Address: 5# No. 16 Xihong Road, MeiCun Industrial Park Wuxi New district, Jiangsu Province

Tel0510-88158085,88158055  FAX0510-88158086  Emailshiquan.tan@formentec.com